flyinglabo · ski jumping parts
Flying SHOP — 3D printed & data
← naokinakamura.site
🚧 PREVIEW This shop is a preview — not yet for sale. Showcase only; ordering opens once FIS approval is granted.
🚚 EUROPE-WIDE SHIPPING · €15 FLAT / ORDER
We ship within Europe. Combine anything — plates, tool sets, singles; shipping is charged once per order, tracked. STL downloads ship nothing, cost nothing.
live preview · drag to orbit
drag rotate · scroll / pinch zoom
parametric ramp plate

Build your plate.

Dimensions

Length
100 – 250 mm
195mm
100175250
Height
thick end · max 15 mm
14mm
28.515
Width
fixed profile
🔒 90 mm
Thin edge
tapered end
🔒 1 mm

Your plate

Footprint
195 × 90mm
Profile
14 → 1mm
Volume
106.7cm³
PLA weight
132g
€1data
Custom 3D modelDownload the STL, print it yourself.
€5/ plate
Printed — singleOne plate, printed in PLA to your spec.
€10/ pair
Printed — pairTwo plates, same spec. One for each ski.
Preview STL is watermarked at low resolution. The paid €1 file is the clean, print-ready mesh. Checkout is a demo here — wire it to Stripe to go live.
fis tools · drag to orbit
loading…
↓ parts & hardware (PDF)
equipment control · real mesh

TOL axis

FIS equipment control tools

printed & shipped · official FIS data · 2026/27

The FIS-published DIY equipment-control tool files, printed in rigid PLA and shipped ready to use. What you're buying is the printing: machine time, dimensional checks, and one box with everything in it. Prefer to print it yourself? The raw 3D files are published free by FIS — download them from the FIS server and print at home.

ToolPartsFootprintHardware
TOL axis V042396 mm bar + 101 mm top · also sold alonePDF ↗
Sleeve Mount2180 × 83 mmPDF ↗
Leg Mount382 × 76 × 36 mmPDF ↗
T-angle Arm1185 × 150 mmPDF ↗
Rear Cut-Out Template1150 × 100 mmPDF ↗
New for 2026/27
TOA axis2243 mm bar + closurePDF ↗
Strap Clip S / M / L2 (pair)56 × 72 mmPDF ↗
Crotch Template180 × 180 mmPDF ↗
Zipper Clamp240 × 80 mmPDF ↗
Digital measuring tape—commercial · not printedFlyer ↗
Each Hardware link opens the official FIS DIY manual right here in the page — it lists the screws & inserts you buy yourself (e.g. TOL needs 4× RAMPA knock-in inserts + 4× M5×8 Torx countersunk screws) with purchase links. T-angle Arm, Rear Template, Strap Clip & Crotch Template are simple parts with no extra hardware. The digital measuring tape is a commercial device (Sigma) — flyer only, not printed here.
⚠︎ These are the FIS equipment-control tools as published for the 2026/27 season (as of July 2026). FIS may revise the equipment rules at any time — a tool can become non-compliant after a rule update. Always check the current FIS rules before use; we update the models when FIS publishes new versions.
TBApricing soon
Complete FIS tool setThe 5 core tools: TOL axis (V04), Sleeve, Leg, T-angle & Rear.
TBApricing soon
TOL axis (V04) — single tool2 parts (Basis + Top). The big one, on its own.
Printed at high infill for measuring rigidity. FIS DIY assembly manuals are included as a QR link in the box. No STL sales here — the data is freely published by FIS; we charge for printing & handling only. Pricing is being finalised — ordering opens after FIS approval.